Hangar Safety and Fall Protection

Hangar Safety and Fall Protection

Hangar Safety and Fall Protection

Begin a Culture of Safety Starting Today

 Without a culture of safety in your hangar, there is an increased risk of having an accident occur.

hangar safety guide and fall protectionCreating such a culture requires more than just a few signs and the occasional training session. A true culture of safety is reinforced every day in multiple ways. Rules and regulations are important, as they should be, but so are practical solutions.

You want your people to remain productive without worrying about whether or not they’ll suffer an injury. It is that kind of indecision, in fact, that typically leads to an injury happening.

A great place to get started when discussing hangar safety and fall protection is to point out one simple fact: rules and regulations are in place because someone already suffered an injury because those steps were ignored or they did not exist. Something as simple as a wedding band can be enough to cause a gruesome injury while on duty.

Many of today’s maintenance veterans have experienced at least one accident. Some have lifelong scars that prove their dedication, but are also reminders of why safety must be a culture, not just a priority. Accidents may still continue to happen. By reinforcing the concepts of safety every day and making it part of the routine instead of another rule to follow, it is possible to reduce injury rates.

Make Sure You Get Your Safety Basics Right


There are always a few people on every maintenance team that are the “tough guys.” These are the men and women who feel like they can work without proper protective equipment.

In the hangar, proper personal protective equipment, your PPEs, must be a top priority. Hearing protection, eye protection, gloves when necessary, and breathing protection must be part of your standard policies. OSHA requires employers to provide and pay for PPE in the United States. [1]

What is often overlooked with PPE in a culture of hangar safety is the clothing workers are wearing. Protective clothing may or may not be necessary, but loose clothing and long hair must be eliminated. That doesn’t mean you can’t wear your hair long, but it should be tied back. Any loose clothing items should be secured. [2]

Closed-toed shoes should be mentioned in your PPE policies as well. If they are not, then those “tough guys” may come to work wearing flip-flops and hold you liable if something happens to their feet. In the hangar, safety footwear should be a subject that is addressed from Day #1 of employment. Address sole punctures, toecaps, metatarsal protection, or even electric shock protection whenever necessary and perform regular inspections to ensure the correct footwear is being worn. [3]


Good Safety Means Having Safety Stations Available

 The personal protective equipment your people wear in the hangar is only as good as its maintained condition. Since you are purchasing this equipment, you can mandate that it stay at the worksite. That reduces the risk of something unforeseen happening with the equipment, which can lessen liability risks.

One of the best ways to maintain a culture of safety is to setup various PPE supply and organization stations throughout your worksite. Have a place where boots can be left for the next day. Have dispensers for gloves, masks, and other disposable PPE items. A good way to get started with this design could be to install your first stations next to your mandatory MSDS “Right to Know” compliance centers. [4]

When safety items are visible in the hangar, they are more likely to be used.

To improve safety, consider offering a summary of your safety rules at each PPE station. You can include the full manual of regulations if you wish, but a poster of your standardized rules in bullet form can reinforce the idea of staying safe on the job for each worker. Incorporating images with each key point can encourage the culture of safety, as can the simple act of asking for employee feedback about the posters. [5]


Tips to Improve Fall Safety at Your Worksite

 Preventing falls at your hangar requires every worker to be vigilant. Slips, trips, and falls in 2013 resulted in nearly 230,000 cases that involved time away from work at U.S.-based job sites. Over 700 workers were killed because of a fall they suffered. [6]

A culture of safety can reduce the risks of a fall when employees can spot a fall hazard and either remove or avoid it. Preventing slips and trips can be as simple as ensuring all walkways, platforms, and scaffolds are free of clutter, debris, or other obstacles. Here are some additional recommendations to implement.

  • Any spills should be cleaned up immediately and warning signage should be placed at the location.
  • All drawers, cabinets, and doors should be kept shut when not being used.
  • Cords and cables should be properly covered if they must be in a walkway.
  • Ensure proper lighting is in place.
  • Use abrasive floor mats, treads, and other technologies that improve worker traction.

Falls can be prevented in the hangar with proper safety equipment. If working on an elevated platform, for example, the worker should have access to a proper safety harness. The harness should allow them to complete their work, but prevent them from falling should an unforeseen event occur.

Encourage workers to make wide turns whenever possible when walking around a corner, use handrails and other safety support devices, and encourage a culture that doesn’t make a worker feel like they need to rush.

A workplace that hasn’t had an accident yet is not evidence of a culture of safety. It just means there hasn’t been an accident. This culture begins at the top. Whether you’re an owner or a member of the C-Suite, make hangar safety and fall protection a top priority, starting with these basic principles.

[1]Handout #7: Employers Must Provide and Pay for PPE.”

[2]Personal Protective Equipment.” The University of Vermont.

[3]OSH Answer Fact Sheets.” Canadian Centre for Occupational Health and Safety.

[4]Hazard Communication Guidelines for Compliance.”

[5]8 Steps to Creating an Effective Health and Safety Poster.” NewGround. November 22, 2014.

[6] Depa, Tracy Haas. “Preventing Slips, Trips, and Falls.” Safety and Health Magazine. May 2, 2016.

Wing Platform Stands from Custom Aircraft Platforms

For both military and commercial aircraft, wing platform stands are essential for two distinct possibilities. When it comes to ongoing maintenance of your aircraft, you’re going to need aircraft

B767 B777 Wing-Dock

maintenance stands that will allow you to work both safely and efficiently. Wing platform stands is just one example of this larger subject, but there is no question that you are talking about an essential element to the care of your aircraft.


In terms of getting the wing platform stand you will need, there are several things that you are going to want to keep in mind. For example, you will certainly want to understand the need for custom wing platform stands. It is extremely important to have something that will allow you to work as you need to.


The Value Of A Wing Platform Stand

There are several broad features with wing platform stands that are worth keeping in mind. Collapsible guardrails is just one example of what we are talking about. You’re also going to want something that has been inclined to match your wing surfaces. Modular construction is something else that will define virtually any wing platform stand you are going to find. Air and electric setup is another feature that our clients often consider, regardless of what they ultimately purchase. At the same time, you will also want to have multiple tow bars, in order to address a myriad of potential demands throughout the workday.


Finally, it should go without saying that you will want your wing platform stand to meet OSHA standards (1). Anything in your industry that is not OSHA-compliant is something we all understand should be avoided at all costs.


All of these different thoughts will compel you to find a wing platform stand that is ultimately going to meet your needs. Keeping all of these things in mind, you can begin to appreciate the value of going the custom route. While there are certain features that should define any wing platform stand that is worth your time and money, there are a number of elements that need to be addressed in the most specific terms possible. In other words, you’re going to need to take a long and short-term view of how you are going to utilize your wing platform stand.


While there are several sizes that can benefit several different groups simultaneously, there are also going to be times in which you need something along more customized lines. This is where the benefit of customized wing platform stands becomes clear.


The Benefits Of Custom Wing Platform Stands

It demands repeating: When it comes to wing platform stands, there are certain demands that everyone must keep in mind. For example, regardless of the customized elements of your wing

Custom Aircraft Maintenance Wing Platforms

Custom Aircraft Maintenance Wing Platforms

platform stand, you are going to want something that is made from lightweight aluminum construction (2). Not only should this wing platform stand have the ability to stand the test of time, but you should also expect something that is also corrosion-resistant.


You should be able to rely on your wing platform stand for years and years to come. Otherwise, when it comes to wing platform stands, anything less than that is going to be a waste of your time and money.


Putting in a custom order ensures all of the basic requirements for wing platform stands will be met. At the same time, it also gives you the ability to have a platform that you are going to be able to rely upon for any kind of repair or maintenance work you might have in mind. A custom solution allows you to consider your needs for not only the present, but for the future of your aircraft, as well.


Furthermore, custom wing platform stands are far more affordable than you might think. Whether you have a wide range of aircraft, which features crafts of all shapes and sizes, or if you have just one modest aircraft, you can afford custom aircraft maintenance stands. Not only are you getting something that is going to be able to stand the test of time, but you will also have something that will deliver direct, tangible results, regardless of what the work demands.


Your workers need something that will allow them to work quickly at their maintenance/care/repair tasks. At the same time, they also need something that will allow them to work in complete confidence and safety. With both of these demands being met, you can expect consistent efficiency. You won’t have to plan around a maintenance stand that is only useful most of the time. You are going to have something that will be able to address your needs each and every time, and regardless of what those needs are actually going to be.


Wing platform stands represents a vital member of your crew. Make sure you have the best one possible.

Why Tug Tech Is an Industry Leader

Why Tug Tech Is an Industry Leader

Why Tug Tech Is an Industry Leader

 For ground crews around the world, speed and safety are two critical metrics that are incorporated into almost every completed task. Whether an aircraft needs to be loaded, unloaded, or just needs general service support, Tug Tech provides crews with the reliable ground service equipment that will help meet even the toughest of turnaround times.

There are a number of GSE options provided by Tug Tech for crews and contracts large or small. There are options that fit into almost every budget. What could your service crews use to improve the services they provide today?


Tug Tech Baggage Tractors:

If you have an early morning flight that has thousands of pounds of freight to load in addition to the normal baggage, then you need to have ground service equipment that will let your crews make as few trips back and forth as possible. The Tug Tech baggage tractors are designed to work with your current cart setup while providing extra space in the back for those emergency runs you sometimes need to make.

You get the baggage loaded safely and the freight loaded quickly while reducing the risks of damage. That’s a win/win situation for any crew.


TUG Air Starts:

When it’s time to start the engines of an aircraft, a high quality air start unit can save a ground crew and a flight crew from a major headache. The best air starts have high power-to-weight ratios, but stay cool so they can be used time and time again. Tug Tech offers four different categories of air starts that can be hooked up to virtually any tractor so you can start flight after flight with ease.

Tug Tech offers the Air Start 150/180, Air Start 250, Air Start 270, and Air Start 400 for your consideration. Each model has certain strengths that will save you time and money, making this GSE option one of the best investments you can make right now.


Tug Tech Cargo Tractors:

This is your aviation-based heavy duty transportation solution. Four different models can allow your ground crews to effectively transport cargo to and from each flight. You’ll also receive the reliable transportation needed with these tractors to move equipment and supplies from site to site at your location. Need to restock a flight? Done. Have unexpected cargo that’s flying out in 15 minutes or less? Your crew can meet the deadline.


TUG Belt Loaders:

Survey ground crews around the world and you’ll find that the belt loader is the one vehicle that everyone loves to drive. It’s also one of your most essential GSE options when you have large baggage and freight loading or unloading needs. The right belt loader will help you effectively stack cargo bins, make deliveries, and do so without damage or injury.

Tug Tech offers the TUG 440E, TUG 660, and TUG 660E as options to help you meet your contracted obligations.


Tug Tech GPUs:

This GSE option is the lifeblood of what you do. Without power, you have a difficult time servicing an aircraft unless you keep the APU running – and that can be a costly proposition. Tug Tech provides numerous sizes of ground power units so that contracts large and small can be met with the quality you demand. Start-ups and hook-ups are simple and the power streams are consistent so that your people can work on turning around a flight as quickly as possible.

GPUs are also essential for certain maintenance and inspection tasks that you may need to complete. From the 28V TUG Magnum to the 400/180 GPU, you’ll have plenty of choices that can meet virtually any budget.


TUG Pushbacks and Tractors:

Whether you’re servicing regional aircraft or jumbos, Tug Tech has established a solid reputation for their pushback and general tow tractor product lines. When you get behind the wheel of these workhorses, you’ll know that you can reliably position aircraft into parking or taxing positions without difficulty.

You can also have confidence in this GSE that will help you bring back a malfunctioning aircraft should the need arise. If the brakes lock up and you need to bring an aircraft back into the gate, Tug Tech provides you the power needed to make that happen.

From air conditioners to government units to the ground support equipment your crews use every day, Tug Tech makes some of the most reliable options that are available in our industry today. If you’re looking to take your contract services to the next level, then we highly recommend taking a look at what TUG products can provide you today.

Commercial Aircraft Platforms

Commercial Aircraft Platforms

Commercial Aircraft Platforms

Commercial aircraft platforms are one of the most important assets we have in our industry today. Not only do they provide maintenance crews with the safe access needed for their duties, but they also allow teams to provide the quick response necessary to get aircraft and rotor craft back into the friendly skies with more speed.

Finding the correct commercial aircraft platform for your needs doesn’t have to be a complicated process. Here are the various options that are available today and the benefits that each is able to provide.

1. Daily Maintenance Platforms

 Regular maintenance and inspections are an ongoing process. You need to have an aircraft platform that will be flexible enough to work in various situations, yet also be able to provide crew access to multiple workers at times. A daily maintenance platform is lightweight enough to go just about anywhere, but still offer the durability and stability that your job duties demand.

The B-Series stands would also be included with this category. They may be a little cumbersome for some tasks, especially in terms of maneuverability, but you’ll still receive the access you need for a price that doesn’t break the budget.

This type of commercial aircraft platform is designed more for light maintenance duties and regular inspections. If you have extensive maintenance or repairs that need to be completed, we recommend looking at one of our other platform options that are available.

2. Wrap-Around Aircraft Platforms

This is the type of platform needed when your team will be working on the entire aircraft or rotor craft. These commercial aircraft platforms do what their title implies – they provide complete access to the aircraft or rotor craft by wrapping around each section. The benefit this type of platform provides is the on-board air and electrical services that are available at key location points. This makes maintenance crews more effective because they have everything they need to get their job done right there on the platform.

Most of the platforms that are currently available in this category are designed for in-hangar use. They can be erected quickly and dismantled effectively when the job is completed so you can focus more of your time on what you do best.

3. Section Specific Commercial Aircraft Platforms

Maybe you don’t need to wrap an entire aircraft or rotor craft with a platform. Maybe you just need to work on the tail section of an aircraft. In that instance, a section specific commercial aircraft platform makes more sense. Each section of the aircraft can have its own specific platform, including the nose, the fuselage, or the landing gear and brake assembly.

These platforms have the same advantages of a wrap-around platform, but are more affordable because you’re targeting a specific section. This also gives the platform a little extra portability if you service similar aircraft or rotor craft makes and models, reducing the potential number of platforms that may need to be available.

Many of the platforms in this category are suitable for use outdoors as well as in the hangar. Look for quality features like locking stairs and high quality wheel brakes to achieve the best possible results.

4. Custom Commercial Aircraft Platforms

Sometimes an aircraft-specific platform just isn’t what you need. You may need something more permanent than a daily use maintenance platform, but still need the platform to be flexible enough that it could be used every day if called upon. In these situations, your best option is a custom commercial aircraft platform.

Custom platforms meet or exceed the same government safety standards that their standardized counterparts are designed to meet. The same lightweight and corrosion-resistant materials are used to give your platform the strong backbone a modern maintenance crew requires. On-board electrical and air services are also a possibility.

You receive all of the features that you need and pay for none that you do not. In many instances, a completely customized aircraft platform is competitive in price to aircraft-specific models because you stay in full control of the design, sizing, and features required.

Commercial aircraft platforms give you the safe and reliable access you need to perform your maintenance and inspection duties on a regular basis.

Our team is standing by right now to answer any questions you may have about the type of platform you may need. We can also talk about customization options and what makes sense for your current situation.

It’s time to stop settling for your second-best option. Save time and invest into yourself by choosing the right commercial aircraft platform to meet your needs today.

Request a Quote
What You Need To Know Before Purchase a Custom Aircraft Platform

What You Need To Know Before Purchase a Custom Aircraft Platform

What You Need To Know Before Purchase a Custom Aircraft Platform

 Every custom maintenance platform and aircraft platform needs to meet certain occupational safety standards. The last thing you need to have happen is an accident that can be faulted to using the wrong equipment or platform. It’s not just the platform itself that must meet or exceed these standards. Any stairways and ladders associated with the platform must also follow specific guidelines.

Before purchasing any custom aircraft platform, ask if it meets hand rail, guard rail, and other miscellaneous safety guidelines. This way you can make sure you’re receiving a high quality product for the investment you’re about to make.

That’s not the only subject you’ll need to review before you finalize a purchase. Here’s some more information you need to know so you can be confident in the order you’re about to place.


  1. Many non-skid and non-slip materials are independently manufactured.

    If you are purchasing a custom aircraft platform which offers non-skid or non-slip features that are not associated with metal texturing, then there’s a good chance that the items are being manufactured by a third-party. Ask for the name of this manufacturer. Then go to ThomasNet to see if the manufacturer is listed and what brands are represented. The information should match up. If it doesn’t, then it’s time to find a new custom aircraft platform supplier.

  2. There are different aluminum alloys that may be used.

    Aluminum is a common metal used for custom aircraft platforms because it is so versatile. Yet what is often not communicated to the customer is the actual grade of the aluminum being used. This metal comes in several different shapes and grades and the wrong one could create devastating consequences for you in the future. This guide to choosing the right aluminum grade will help you find the correct alloy to use – then ask about the alloy being used for your new platform.

  3. Get your dimensions and then confirm them twice.

    Maybe you’ve seen some of the humor posts of customers who purchased products on Amazon without confirming their dimensions. It’s funny if you buy a tiny rug, assuming you can get your money refunded. It’s not so funny if your dimensions are off when you’re purchasing a custom platform. For this reason, we highly recommend that you measure your own dimensions and then confirm the final dimensions at least twice to make sure the platform meets your expectations.

  4. Get to know your preferred maintenance platform supplier on a personal level.

    Business has been and always will be about relationships. The goal should be to create a repetition of a beneficial transaction for both parties every single time. To make repetition possible, you’ve got to know what your supplier will build on your behalf and your supplier needs to get to know you. The benefit of doing this is that should something unforeseen happen, you’ll have contacts in place that can quickly make things right for you.

  5. Know your current inventory.

    Although custom aircraft platforms and aircraft specific platforms are the two best products our industry produces right now, that doesn’t mean they are your only options. Sometimes you have maintenance platforms that can safely pull double duty for you. It’s important to take current stock of your inventory to make sure you need to make an investment in the first place.

  6. Pay attention to what the competition is doing.

    Could you also get a similar deal if you contacted this place? Is the quality of the platforms equal or better to the ones you’re currently ordering? Do the platforms meet or exceed the current government safety standards that are mandated for your product? Sometimes a great deal really is what it seems to be, but more often than not, saving money means cutting down on the quality of final product received.

  7. Understand the impact of your product.

    Your custom aircraft platforms are going to give you opportunities to increase profit dollars, earn higher margins, and eventually even produce more lucrative contracts for your agency. To understand how your platform benefits you, it becomes necessary to create metrics that measure each task your team completes on a regular basis. Compare the metrics from the old equipment to the new equipment and you’ll see what is improving – or what may be sliding backward on you.

 Purchasing a custom aircraft platform or maintenance platform for your business needs can be beneficial to your bottom line. It only pays off if you know what you’re purchasing ahead of time so that you can measure its value. Follow these steps, contact us with any questions you may have, and it would be an honor if you choose us for your next need in this area.

Request a Quote


Aviation Maintenance Stands for any Aircraft

Aviation Maintenance Stands for any Aircraft

Aviation Maintenance Stands For Any Aircraft

Strictly in terms of aviation maintenance stands, it is important to remember that you are talking about an extremely flexible concept. Simply put, aircraft maintenance platforms as a concept needs to account for the fact that there are tons and tons of different aircraft types out there. This is why it is always important when choosing your maintenance stand, to make sure you are working with a company that understands the potential of custom aircraft platforms.

We can help with absolutely anything you might have in mind. Your maintenance stand needs to take into consideration the types of aircraft that you have. These stands must consider everything that you want to accomplish over both the short-term and the long-term. When you have what you are looking for, in terms of aviation maintenance stands, you are going to have a number of crucial benefits in your corner.

For one thing, with the best in custom aircraft platforms, your workers will be able to focus on the aspects of maintenance that actually matter.

Aviation Maintenance Platforms

Aircraft maintenance platforms need to accomplish several things simultaneously. They need to be built from materials that will be able to stand up to the test of time. This means the constant demand to take on the weight and movements of your workers. It also means materials that can resist corrosion and other undesirables. If you don’t have an aircraft maintenance platform that is built from the finest materials in the world, you are going to have some serious problems on your hands before long.

You certainly need custom aircraft platforms. As we have already mentioned, there is simply no such thing as an aircraft maintenance stand that can work for every type of aircraft under the sun. It is true that there are certain elements to these platforms that you will always find, regardless of the specifics of the platform. For example, you can expect all platforms built by our company to adhere to the strictest standards for both safety and quality. While there are innumerable custom touches that you can bring to the design and production of aviation maintenance stands, there are certain things that should hold true for every single aircraft maintenance stand that leaves our company.

Maintenance is one of the most important aspects to caring for your aircraft. Without the best possible maintenance stand beneath your feet, you won’t be able to care for your aircraft as you will need to.

Helicopter Maintenance Platforms For Safe Aircraft Access

Helicopter Maintenance Platforms For Safe Aircraft Access

Helicopter Maintenance Platforms For Safe Aircraft Access

Helicopter maintenance platforms must accomplish several things simultaneously. They must provide you with a multifaceted approach to making sure you are meeting the maintenance demands of your aircraft. At the same time, it must provide you with a safe, efficient means of keeping your aircraft properly maintained. This kind of work can sometimes involve working on elaborate, difficult repairs.

In a situation such as that, it should go without saying that you are going to want to take helicopter work stands seriously. To that end, make sure you are getting the best in helicopter access platforms. This means making sure that you are working with the best, in terms of having your platform designed and built by the best in the industry. You have certainly come to the right place for that kind of quality.

Helicopter Maintenance Platform

When it comes to having helicopter maintenance platforms built, what would you say you are looking for? Do you want a platform for short-term work, a very specific project, or to cover a wide range of potential maintenance/repair demands. Take the search for helicopter access platforms seriously. Your aircraft represents a profound investment in your business. In many cases, when we are talking about the aircraft, we are talking about the heart and soul of your business. Make sure you doing everything possible to keep that investment safe.

When your workers and maintenance professionals have the right equipment, they are going to be that much better at carrying out the demands of their job. This means that you are going to get everything out of your aircraft that you need. It may strike you as strange that helicopter maintenance platforms are bringing so much to the table, but it is the truth.

Remember that at the end of the day, you are in control of the experience you have with ordering helicopter access platforms. There are a number of custom touches that can be brought to the creation of your access platform. Any company that you might work with will have the ability to take you through all of the custom possibilities that you can explore. After all, we are talking about your aircraft. Doesn’t it make sense to want something that will ensure you can care for those aircraft in the most efficient fashion possible?

Height Adjustable Maintenance Platforms

Height Adjustable Maintenance Platforms

Height Adjustable Maintenance Platforms

As a concept, height adjustable maintenance platforms must be comprehensive. They must adhere to the requirements of the company or individual. At the same time, these platforms must also meet certain manufacturing requirements and demands, particularly in terms of safety. In other words, if you are going to work with a company that specializes in the design and creation of maintenance platforms, then you need someone who can juggle all of the elements we are talking about.

You need to work with a company that can meet the various requirements for safety and quality. At the same time, you need this company to respect the demands you have for the platform. To put it another way, you need a company that will take into account your plans with height adjustable maintenance platforms.

On both of those fronts for height adjustable work stands, there is no question that you have come to the right place. Custom adjustable platforms are a vital component to your day-to-day functions, regardless of the specifics of those functions.


Height Adjustable Maintenance Platform

What are you going to need your maintenance platform for? Do you need something that can help you with a specific, short-term project, or do you want something that you will be able to rely upon for years to come, across a wide span of projects? Regardless of how you answer that question, you should be able to find something that will give you the end result you are after. In other words, custom adjustable platforms should mean exactly that. You should be able to get the end result you are looking for, which would be something that allows your workers to complete maintenance tasks effectively, and in complete safety.

Height adjustable work stands should be made from the finest materials. They should be able to work with your particular requirements, and they should be able to do this for as long as you are going to need them to. Quite frankly, anything less than that is going to prove to be an enormous waste of your time and money.

There are numerous little details that can help to make sure your maintenance platform has been created to your very precise specifications. For example, you may want to consider handrails. Then again, this may not be something you need with height adjustable maintenance platforms. What matters is that you communicate what you need to the company you have chosen, knowing you’ll get what you want.

Custom Maintenance Platforms & Work Stands

If you need a custom airplane platform, look no further than Custom Aircraft Platforms. Custom Aircraft Platforms has been in business providing clients with custom platforms that fit their aircraft’s specifications. On our site, you can browse around to learn more about our company, as well as the solutions and services we offer, but here’s a brief overview. Custom Aircraft Platforms is your one stop shop for all of your aircraft platform needs. We offer engine, fuselage, noise, tail, and wing maintenance, as well as flight line, full phase and height adjustable solutions. We also offer custom platform design as well as engineering services. Custom Aircraft Platforms can even help you sell your platform.


The proof of Custom Aircraft Platforms’ quality can be seen in our communication and accessibility throughout every step of the process with customers. Words are cheap. Custom Aircraft Platforms is here to work with clients throughout the entire process, to ensure satisfaction.


Custom Aircraft Platforms is dedicated to excellence and quality in every aspect of our products, and emphasizes customer service and satisfaction. Our team at Custom Aircraft Platforms is focused on quality, from design to manufacturing to assembly. When you work with Custom Aircraft Platforms, you can trust that you are getting the highest quality materials and service on the market.


If you need a custom maintenance platform or you think you found something on our site that might work for you, we’ll be happy to show you what costs you may have if you use our products to meet your current and future needs. In the upper right-hand corner, you will see a RFQ tab. Click that, and you will be directed to a page where you can request a free quote. Our service representatives will make sure your request is answered quickly and effectively. If you have any questions, feel free to call (727) 388-8398 during normal business hours. From all of us here at Custom Aircraft Platforms, we look forward to working with you!

Request a Quote